How To Use The Auto-Course - FujiFilm EC-3000 Manual

Introduction
After turning the power ON, the LCD in the
initial stage displays the screens as shown
on the right side alternately.
When changing from an AUTO-COURSE to
another AUTO-COURSE, or when changing
non-AUTO-COURSE massage to any
AUTO-COURSE option (see Page 51).
START
/RESET
AUTO
AIR
REPEAT
ADJUSTMENT
SKIP
MENU
SHDR
ENTER
W/H
FOOTREST
RESET
FORWARD

How to Use the AUTO-COURSE

1.
2. Press the [AUTO] button. Or, select "AUTO" with
STOP
FUNCTION
*
HEIGHT
ARM
LEG
3. Select a desired course with the
RECLINER
BACK
Press the [START/RESET] button.
Foot-rest goes up automatically to the standby position.
(To interrupt on the way, press the [STOP] button.)
The standby screen comes out.
Be deeply seated on the chair, and
recline yourself slowly with your
head on the back-rest.
the button, and press the [ENTER] button.
All of the AUTO-COURSE options
are displayed.
The [ENTER] button remains not
to be pressed. Even so, all the
options are displayed 5 seconds
later. (The same holds good of this
procedure.)
the [AUTO] button, and press the [ENTER] button.
Select one out of the 4 courses of "WHOLE BODY",
"SHOULDER", "WAIST" and "7MIN".
There are 4 sub-courses in the "WHOLE BODY" course,
and 3 sub-courses in the "SHOULDER" and, "WAIST"
course each.
16
button or