FujiFilm EC-3000 Manual page 10

Place the chair on a level surface with enough space
around.
■ Request: With the back-rest reclined backward, the foot-rest
comes up. Keep space of 70cm or more ahead and
60cm or more behind.
■ Request: The chair may damage the floor. Spread a mattress
for protection.
■ Request: Avoid placing the chair at the place exposed to the
direct ray of the sunshine for long hours every day
or at the place of high temperature, e.g. close to a
heater. The cover cloth may discolor or change in
quality.
Lift up the front side of the chair, and push it forward.
CAUTION
Do not move the chair with a person or any object
seated on it to avoid the possible upset.
Do not move the chair with its casters, or do not drag
it on the floor so as not to damage the floor surface.
Do not hold the seat, the foot-rest or the shoulder
unit to move the chair.
Be careful when lifting up the front side of the
chair; it is very heavy.
CAUTION
Be sure to make grounding connection.
Without grounding connection,
leakage may cause electric shock.
For inquiry on grounding
connection, contact your dealer.
Do not make grounding connection
at the following places:
Gas pipe so as not to cause the hazard
of explosion or not to catch fire.
Telephone cord or lightening rod not so
as to cause the hazard by thunderbolt.
Water pipe with plastics used partly,
since it does not function as
grounding connection.
Preparation Before Use
Where to place the chair.
How to move the chair.
Grounding connection.
9
70cm or more
Lift up the front
side of the chair
The receptacle in your place is already
equipped with the grounding terminal.
Connect the grounding cable
(packaged) with the
grounding terminal of the
receptacle of the grounding
terminal screw of the chair.
Grounding cable
* (Grounding terminals are provided on the models for
Thailand, Sweden, France and Russia.)
The receptacle in your place is not
equipped with the grounding terminal.
Contact your dealer or any electrical worker
for grounding connection.
60 cm or more
Caster