Using The Headphones; Connecting The Headphones To A Second Bluetooth ® Device - Silvercrest SBKL 40 A1 Operation And Safety Notes

NOTE: The LED
6
charging. Once the battery is charged,
above 50 % battery capacity the LED
will light up green.
Once charging has completed, remove the
micro-USB plug from the headphones.
Battery capacity indicator:
LED indicator Battery capacity
status
Solid green color 51 % to 100 %
Solid amber color 26 % to 50 %
Solid red color less than 25 %
Flashing red color Battery is charging.

Using the headphones

Connect the headphones with a communi-
cation device.
Place the headphones near a switched on
communication device (e.g. mobile or
computer).
Pairing with a new Bluetooth
the On / Off button
until the LED flashes white. This indicates
7
the headphones are now ready to connect
mode, which remains active for 5 minutes.
The headphones will switch off if they do not
detect a Bluetooth
Now connect your communication device
(mobile phone or computer) via Bluetooth
with the headphones. Please refer to the
notes in the instructions for your communica-
tion device. Select the entry "SBKL 40 A1"
from the list of devices detected by your
computer or mobile.
Once the connection has been established,
the LED will flash white for 5 seconds.
7
After that the LED
Please note, your communication device
must support Bluetooth
use all options.
You may need to approve the connection
on the communication device. Please refer
will flash red whilst
6
device: Hold
®
for approx. 4 seconds
13
device to connect to.
®
will turn OFF.
7
Standard 4.1 to
®
to the instructions for use of the communica-
tion device on this topic!
The headphones may be manually switched
off by holding the On / Off button
4 seconds until the LEDs
Bluetooth indicator:
LED indicator
status
Flashing white
Solid white
(5 seconds) and
then turn OFF
Connecting the headphones
to a second Bluetooth
The headphones may be connected to two
Bluetooth communication devices at the same
®
time. If the headphones are already connected
to a device, follow the steps below to connect
to the second device:
Activate multipoint mode by pressing and
holding Bluetooth button
The first communication device (mobile phone
or computer) is disconnected.
Now connect to the second communication
device via Bluetooth
Please refer to the notes in the instructions
for your communication device. Select the
entry "SBKL 40 A1" from the list of devices
®
detected by your computer or mobile. The
second communication device is connected.
Select the entry "SBKL 40 A1" from the list
of devices detected by your first communi-
cation device / computer. Now, both com-
munication devices are connected to the
headphones simultaneously.
After connected the headphone with 2
Bluetooth devices, you can playback music
via either one of device.
for
13
and go.
6 7
Headphone state
Pairing mode
Paired
device
®
for 2 seconds.
8
with the headphones.
®
GB/IE 21