Wyrestorm SW-0501-HDBT Installation Manual
Hide thumbs
Also See for SW-0501-HDBT:
- Installation manual (22 pages) ,
- Api manual (14 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Installation Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Wyrestorm SW-0501-HDBT
Summary of Contents for Wyrestorm SW-0501-HDBT
- Page 1 Installation Guide SW-0501-HDBT Document Revision: v2.0 Document Date: March 6 2018 Supported Firmware: V1.0.0 or higher Copyright © 2018 WyreStorm Technologies | Product specifications or appearance subject to change without notice.
-
Page 2: Important! Safety Information
Do Not hot swap HDMI or HDBaseT connections - Insert and extract cables carefully with the power SWITCHED OFF. Power is passed along transmissions so connecting and disconnecting cables while powered can result in damage to circuitry or possible injury. © Copyright 2018 WyreStorm Technologies | wyrestorm.com Outside UK: 844.280.WYRE (9973) | UK: +44 (0) 1793 230 343... -
Page 3: Table Of Contents
Troubleshooting ........................... 14 Contacting Technical Support ...................... 15 Revision History ........................... 15 Publication Disclaimer ......................... 15 © Copyright 2018 WyreStorm Technologies | wyrestorm.com Outside UK: 844.280.WYRE (9973) | UK: +44 (0) 1793 230 343 3 of 16 SW-0501-HDBT Installation Guide | 180306... -
Page 4: Product Overview
Press to select VGA input as the current source. An illuminated LED indicates the currently selected VGA Input Selection source is VGA. Status Flashing (at 2 second intervals): The SW-0501-HDBT is operating normally. Solid: TheSW-0501-HDBT is powered On. (Power) © Copyright 2018 WyreStorm Technologies | wyrestorm.com... -
Page 5: Rear Panel
RS-232 Wiring for more details. Reset Press and hold for 5 seconds while the SW-0501-HDBT is powered on to restore factory default settings. 19-pin type A HDMI female digital video/audio input. HDMI In 1-4 Supports HDMI and DVI/D (requires adapter-not included). -
Page 6: Specifications
Depth | without Handles 297.8mm/11.73in | 280mm/11.03in Weight 2.3kg/5.07lbs Regulatory Safety and Emission CE | FCC | RoHS © Copyright 2018 WyreStorm Technologies | wyrestorm.com Outside UK: 844.280.WYRE (9973) | UK: +44 (0) 1793 230 343 6 of 16 SW-0501-HDBT Installation Guide | 180306 support@wyrestorm.com... -
Page 7: Wiring And Connections
Wiring and Connections WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the switcher. Read through this section in its entirety before running or terminating the wires to ensure proper operation and to avoid damaging equipment. -
Page 8: Rs-232 Wiring
RS-232 Wiring There are 3 different RS-232 connections on the SW-0501-HDBT that use 2 different connectors. • RS-232 1 - Control of the SW-0501-HDBT using a 4-pin phoenix connector. • RS-232 2 - Control of local devices using a 4-pin phoenix connector. - Page 9 Note: This method can only be used if the switcher will not be controlling a local device using RS-232 2 as the port will be used to jump the signal to the HDBaseT RS-232. © Copyright 2018 WyreStorm Technologies | wyrestorm.com Outside UK: 844.280.WYRE (9973) | UK: +44 (0) 1793 230 343...
-
Page 10: Installation
Installation Using the Table Mounting Bracket The SW-0501-HDBT Presentation Switcher is supplied with a bracket to install under a table or shelf allowing for the unit to hidden out of site in a conference where access is not required. Bracket Parts Included... - Page 11 5. Install the switcher into the bracket that was mounted to under the table or shelf in step 2 using the 4 supplied Switcher Bracket Screws. The installation is now complete and the switcher can be connected to the system. © Copyright 2018 WyreStorm Technologies | wyrestorm.com Outside UK: 844.280.WYRE (9973) | UK: +44 (0) 1793 230 343...
-
Page 12: Setup And Configuration
This feature was not always available on the SW-0501-HDBT v1 and units with firmware v2.8.5.1 or lower require that new firmware is installed in order to take advantage of ScreenLink within an installation. -
Page 13: Configuring The Audio Output
Adjustment Range: -100dB to +12 dB 4. Click Apply to save the changes. Tip: WyreStorm recommends setting the audio output level to 0dB to start as the output will be at an average level for most environments. Display Power Management Configuration The switcher can provide power management of the displays to ensure that they are powered On during presentations. -
Page 14: Troubleshooting
This feature was not always available on the SW-0501-HDBT v1 and units with firmware v2.8.5.1 or lower require that new firmware is installed in order to take advantage of ScreenLink within an installation. -
Page 15: Contacting Technical Support
WyreStorm reserves the right to change software, control codes and specifications without notice. WyreStorm will not be liable for any use of this information or any changes it may make to those products. The use of this information constitutes an agreement by the user to these limitations and exclusions. - Page 16 Tel: +1 518-289-1293 UK/EMEA: Unit 22, Ergo Business Park, Swindon, Wiltshire, SN3 3JW, UK Tel: +44 (0) 1793 230 343 WyreStorm Technologies reserves the right to change the physical appearance or technical specification of this product at any time. Visit wyrestorm.com...
Need help?
Do you have a question about the SW-0501-HDBT and is the answer not in the manual?
Questions and answers