4.5.4. Stream Indicators
CIF
VGA
HD
Full HD
Direct /
relay server
Low
normal
good
xxx KB/s
*Note
If the connection to your camera is always made via the relay server, please check the
following settings:
•
Check if UPnP is enabled in your router
•
Check whether a hardware firewall or software firewall denies a direct connection
•
Check whether several "hops" (routers) are installed between the terminal device
and the Internet.
Display of the resolution of the current stream
Display of the current connection status
Direct:
The Peer2Peer server was able to establish a direct connection between your
device and the camera.
Relay server*:
The Peer2Peer server could not establish a direct connection. The video data
is stored for a short time on the relay server so that your device can obtain the
data from the server. This causes a delay in the stream.
Display of the current assessment of the connection
This is the connection between the base station and the router.
Display of currently consumed kilobits per second
26
English