Advertisement
Rear panel
1 2
1. Cartridge selection switch
(PHONO CARTRIDGE)
Selects MM, MC, impedance, or gain in accordance with
the cartridge to be used.
Conduct setting in accordance with the specifications of the
cartridge or your favorite.
Cartridge
MM
selection
100 kΩ/
Impedance
50 kΩ /33 kΩ
Gain
38 dB
2. Input capacitor selection switch
(PHONO CAPACITY)
Selects an input capacitor in accordance with the cartridge
to be used.
Conduct setting in accordance with the specifications of the
cartridge or your favorite.
Selectable capacitors are the following: 0 pF/47 pF/100 pF/
147 pF/220 pF /320 pF
3
4
5
9
MC-H
MC-M
MC-L
1 kΩ
40 Ω
10 Ω
57 dB
57 dB
66 dB
VACUUM TUBE CONTROL AMPLIFIER CL-1000
6
7
3. Unbalanced input terminals/INPUTS
(LINE-1, LINE-2, LINE-3)
Coaxial input terminal to receive unbalanced audio signals
of a line level
Connect these terminals to an unbalanced output of an
input device such as a CD player with a pin-plug cable.
Incoming audio signals are selected with the input selector
and delivered.
4. EXT-IN (PHONO) terminal
Is an input terminal to connect an analog record player.
Do not connect a CD player or other devices whose output
level is high to this terminal.
Normal playback cannot be achieved due to sound crack.
5. Balanced input terminals/INPUTS
(BAL LINE)
This terminal is an XLR connector input terminal to receive
balanced audio signals of the line level.
Connect these terminals to a balanced output of an input
device such as a CD player with a balanced cable.
Incoming audio signals are selected with the input selector
and delivered.
8
7
Advertisement
