Table of Contents
Advertisement
GENERAL SAFETY RULES
1) To avoid multiple kinds of hazards, read and understand the safety instructions before installing,
operating, repairing, maintaining, changing accessories on or working near the assembly power
tool. Failure to do so can result in serious injury.
2) Only qualified and trained operators should install, adjust or use the assembly power tool.
3) Do not modify this assembly power tool for threaded fasteners. Modifications can reduce the effec-
tiveness of safety measures and increase the risks to the operator. It will also void warranty.
4) Do not discard the safety instructions. Always hand them over to the operator.
5) Do not use the assembly power tool if it has been damaged.
6) Tools must be inspected regularly to verify that the ratings and markings required by this part of
ISO 11148 are legibly marked on the tool. The employer/user must contact the manufacturer to
get missing labels in order to replace them.
PROJECTILE HAZARDS
1) Failure of the workpiece, accessories or even of the inserted tool itself can generate high-velocity
projectiles.
2) Always wear impact resistant eye protection during the operation of the power tool. The grade of
protection required should be assessed for each use.
3) Ensure that the workpiece is securely fixed.
HAZARDS DUE TO ENTANGLEMENT
1) Entanglement hazards can result in choking, scalping and/or lacerations if loose clothing, personal
jewellery, neckware, hair or gloves are not kept away from the tool and accessories.
2) Gloves can become entangled with the rotating drive causing severed or broken fingers.
3) Rotating drive sockets and drive extensions can easily entangle rubber-coated or metal-reinforced
gloves.
4) Do not wear loose-fittings gloves with cut or frayed fingers.
5) Never hold the drive, socket or drive extension.
6) Keep hands away from rotating devices.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Seite 15
Advertisement
Table of Contents
