C) Dab Operation - Renkforce RF-DAB-AP Operating Instructions Manual

Full scan
Manual tune
DRC
Prune
Scan setting
Audio setting
System

c) DAB Operation

Station scan
• If you cannot receive any DAB station after selecting DAB mode, push the button SCAN (2).
• The device will then perform a station scan in the DAB reception range as after first activation
and saves the stations found in the station list.
• During the search, the display (9) shows progress and the number of stations found.
The station scan should be repeated after a change of location or now and then in
order to transfer new stations to the station list.
Station selection from the station list
• Push the buttons PREV (4) or NEXT (8), to select the desired station.
• Confirm your selection by pushing the button SELECT (7).
Station storage
• The device can save up to 10 DAB stations.
• Select the other DAB station to be saved as described above.
• Press and hold the PRESET (6) button until the list of the station memory appears in the
display (9).
For empty station slots, no station name is displayed; if the station slot is already
occupied, the name of the station saved there is displayed.
34
DAB
x
x
x
x
x
FM
x
x
x