Receiver Display - Shure QLX-D Series Manual

QLX-D Wireless System
⑦ Menu Button
• Press to access or select menu screens
• Press to cancel pending changes
• Press and hold to return to the home screen
⑧ RF LED
Illuminates when RF link with transmitter is active.
⑨ IR Window
Align with the transmitter IR window during an IR sync to automatically program transmitters.
⑩ Sync LED
• Blinking: IR sync mode is enabled
• On: Receiver and transmitter aligned for IR sync
11
⑪ Power Cord Strain Relief
Secures power cord.
⑫ Power Supply Jack
Connection point for DC power supply.
⑬ Ethernet Port
For network connection.
• Amber LED (network speed):
off = 10 Mbps, on = 100 Mbps
• Green LED (network status):
off = no network link, on = network link active
flashing = rate corresponds to traffic volume
⑭ Receiver Reset
Press to restore receiver default settings.
⑮ Antenna Connectors
BNC connector for receiver antennas
⑯ Mic/Line Switch
Sets output level to microphone or line.
⑰ XLR Audio Output
Balanced (1: ground, 2: audio +, 3: audio - )
⑱ 1/4" Instrument/Auxiliary Output
Impedance Balanced (Tip: audio, Ring: no audio, Sleeve: ground)

Receiver Display

2017/10/04
12 13 14 15
13 12
TV
14
hr
15
group channel
1
16 17 18
11 10 9 8
scan
network
MHz
7
OL TxOL
menu
power
mn
gain
6
dB
rf audio gain
2 3 4 5
Shure Incorporated
15
7/34