Home Screens; Home Screen Display Options; Adjusting Receiver Display Brightness And Contrast - Shure ULX-D Quick Start Instructions

Home Screens

1
2
Receiver
① Receiver Information
Use >
UTILITIES HOME INFO
② Gain Setting
-18 to +42 dB, or Mute
③ Mic. Offset Indicator
Indicates offset gain is added to the transmitter
④ Transmitter Settings
The following information cycles when a transmitter is tuned to the
receiver's frequency:
• Transmitter Type
• Input Pad (Bodypack only)
• RF Power Level
• Transmitter Lock Status
• Transmitter Mute Status
⑤ Battery Runtime Indicator
• Shure SB900 battery: runtime is displayed in hours:minutes remaining
• AA Batteries: runtime is displayed with a 5-bar indicator
⑥ TV Channel
Displays the TV channel that contains the tuned frequency
⑦ High Density Mode Icon
Displayed when High Density mode is enabled.
Transmitter Status
The following text or icons report transmitter status to the receiver screen:
Display Icon Transmitter Status
Bodypack input is attenuated 12 dB
Offset gain is added to the transmitter
1 mW RF power level
Lo
10 mW RF power level
Nm
20 mW RF power level
Hi
Menu is locked
M
Power is locked
P
Displayed when the transmitter audio is set to off using
TxMuted
the
MUTE MODE
No RF connection between a receiver and transmitter
-No Tx-
or transmitter OFF
Adjusting Receiver Display Brightness and
Contrast
Adjust and
BRIGHTNESS CONTRAST
challenging lighting environments.
1. From the receiver menu:
DEVICE UTILITIES
2. Press the control wheel to select
3. Turn the control to adjust the selected parameter.
4. Press ENTER to save changes.
7
6
5
3 4
to change the home screen display
feature
settings to improve visibility in
>
DISPLAY
or
CONTRAST BRIGHTNESS
Transmitter
① Transmitter Information
Scroll ▲▼ at the home screen to change the display
② Power Lock Indicator
Indicates power switch is disabled
③ Transmitter Audio Muted Indicator
Displayed when the transmitter audio is set to off using the
feature.
④ Battery Runtime Indicator
• Shure SB900 battery: runtime is displayed in hours:minutes remaining
• AA Batteries: runtime is displayed with a 5-bar indicator
⑤ Menu Lock Indicator
Indicates menu navigation buttons are disabled
⑥ Mic. Offset
Displays microphone offset gain value
⑦ RF Power
Displays RF power setting
⑧ Bodypack Input Pad
The input signal is attenuated 12 dB
⑨ Encryption Icon
Indicates encryption is enabled on the receiver and has been transferred
to the transmitter from a sync

Home Screen Display Options

Receiver
The
HOME INFO
the receiver home screen:
DEVICE UTILITIES
Use the control wheel to select one of the following screen displays.
Transmitter
Home Screen: Press the ▲▼ arrows at the home menu to display one of
the following screens:
.
1
2
x 6dB
4 5 6
3
menu provides options to change the information shown on
>
HOME INFO
9
8
7
MUTE MODE
7