Safety Recommendations - Fracarro 3DGFLEX Operating Instructions Manual

1. SAFETY RECOMMENDATIONS

• The product can only be installed by qualified personnel in compliance with local
safety laws and regulations. Fracarro Radioindustrie is free from all civil and criminal
responsibility due to breaches of the current legislation derived from the improper use
of the product by the installer, user or third parties.
• The product must be used in full compliance with the instructions given in this manual,
in order to protect the operator against all possible injury and the product from being
damaged.
• The product must not be exposed to water drips and must be installed indoors inside
in dry places.
• Damp and condensation drops could damage the product. Consequently always wait
for the product to be perfectly dry before use.
• Do not install the product above or close to sources of heat, in dusty atmospheres or
when it could be exposed to corrosive substances.
• High temperatures or overheating could compromise the product functions and life.
• Handle with care. Knocks could damage the product.
• Leave plenty of space around the product to ensure sufficient ventilation.
• If you wall-mount the product, use expansion anchors that are suitable for the
characteristics of the support bracket.
• The product must be connected to the antenna line earth electrode in compliance with
the EN60728-11 standard.
• The earth screw is indicated with the symbol
• It is important to observe the dispositions of the EN60728-11 standard and not connect
this screw (terminal) (product) to the power supply earth line.
• Never remove the product cover: dangerous powered components could be accessible
when the casing is opened.
• In case of a malfunction, do not attempt to repair the product because this would
invalidate the guarantee.
Installation warnings
Earthing the antenna
IMPORTANT
16