Assembly; Wall-Mounting - ProMinent DULCOnneX Installation And Operating Instructions Manual

4

Assembly

CAUTION!
There needs to be Wi-Fi reception at the intended site of the "DULCOnneX gateway".
The unit is suitable for mounting on a wall or a pipe.
Tab. 1: Mounting materials (contained in the scope of delivery):
Description
Wall/tube retaining bracket
Half-round head screws 5x45 mm
Washer 5.3
Rawlplug Ø 8 mm, plastic
Sealing cap
Cable tie
Locking screw (PT)
4.1

Wall-mounting

Assembly (mechanical)
2
1
Fig. 1: Removing the wall/tube retaining bracket
1. Remove the wall/tube retaining bracket.
Pull the two snap-hooks (1) outwards
and push upwards
2. Fold out the wall/tube retaining bracket
(2) and pull out downwards
3. Mark two drill holes diagonally to each
other, using the wall/tube retaining
bracket as a drilling template
4. Drill holes: Ø 8 mm, d = 50 mm
A0273
Assembly
Quantity
1
2
2
2
1
2
1
7