Label Rewinder Kit
GUIDE FRAME UNIT
SUB FRAME
UNIT
SPRING
ADJUST PLATE UNIT
Steps Before Installation
STEP
PROCEDURE
1.
Switch the printer O.. and
disconnect the AC power cord.
2.
Raise the access door and
remove (2) screws holding the
side cover to the inside frame.
.igs. 1 & 2
3.
Remove (2) screws holding the
side cover to the outside frame.
Remove the cover to expose the
electronics.
2
All manuals and user guides at all-guides.com
CABLE STAY
SATO CL-408e Internal Rewinder
REWIND SHAFT UNIT
SCREW ASSORTMENT
(4) BLADE SPRING
TIMING BELT
Fig. 1