Paging - Sanyo CLT-9960 Instruction Manual

All manuals and user guides at all-guides.com
CLT9960 3rd 7/25/00 3:42 PM
ADVANCED CALLING
Resetting the message waiting indicator
PAGE/FIND key

Paging

To locate the handset
Notes:
• By holding PAGE/FIND for more than 2 seconds and up to 60 seconds, the handset beeps
for 60 seconds. If you press and hold for more than 60 seconds, the handset beeps until
you release the key.
• When a call is received during paging, paging stops and the handset rings.
• If you press TALK/END during paging, the handset turns into talk mode.
• Paging cannot be performed while the handset is in use.
Page 39
FEATURES
You may need to occasionally reset the VOICE MAIL
indicator if it remains on after you have retrieved your
messages.
To reset the indicator, put the handset to the base then
press and hold the PAGE/FIND key for two seconds, or
until the indicator stops flashing.
VOICE MAIL indicator
1
Press PAGE/FIND on the base less than 2 seconds.
2
The handset beeps for 5 seconds.
The following screen appears:
Paging
3
Press any key on the handset to stop paging.
E35