Step 3: Preparing The Battery Pack - Sanyo CLT-9960 Instruction Manual

All manuals and user guides at all-guides.com
CLT9960 3rd 7/12/00 6:49 PM
GETTING
Preparing the battery pack
Charge the battery pack for at least 15 hours before you start using your phone.
CHARGE/IN USE
Page 13
STARTED
1
Press on the battery cover and slide the cover
down until it comes off.
BLACK
2
RED Plug in the battery pack connector with the
correct polarity (black and red wires), then insert
the battery pack into the battery compartment.
3
Slide the battery cover on until it snaps into
place.
4
Place the handset on the base.
5
Make sure that the CHARGE/IN USE indicator
lights. If the indicator does not light, check to
see that the AC adaptor is plugged in and that
the handset makes good contact with the base
charging contacts.
Note:
Use only the battery pack supplied or the specified
Sanyo types with your phone.
Type: SANYO 3KR-600AAL or SANYO/GE GES-PCF01
E9