All manuals and user guides at all-guides.com
Use of Telnet
You can control the projector by using the telnet application
installed on your computer. Normally, the telnet application
The telnet 10000 port
is used to control the
is available on your computer.
projector.
Further instructions
about the telnet ap-
Control
on-line guide on your
computer.
Professional.)
1. Select Run... submenu from Start menu on the computer. Type
"telnet" onto the Open text area on the displayed window and press
2. The telnet application will start and the following window will be
displayed. Type as below to connect the projector.
* Use the IP address assigned to the projector.
WORD:" appears on the window. Type the login telnet password
for the projector and then press "Enter" key on the keyboard. If you
* The password "1234" is used for the example.
Appendices
-
59
English
English