Serial Control Interface; Operation - Sanyo PJLink PDG-DXL100 Owner's Manual

All manuals and user guides at all-guides.com
Appendices

Serial Control Interface

1. Connect a RS-232C serial cross cable to
2. Launch a communication software provided with PC and setup the
3. Type the command for controlling the projector and then enter the
rate).
56
English
This projector provides a function to control and monitor the
projector's operations by using the RS-232C serial port.

Operation

projector and serial port on the PC.
communication condition as follows:
"Enter" key.
Example
When you want to change the input to Computer 2
Parity check: : none
Stop bit : 1
Flow control : none
Data bit :
on the
-