Changing Set Entries - Sanyo VA-LANC100 Instruction Manual

Digital recording camera lan kit
Hide thumbs Also See for VA-LANC100:
Table of Contents

Advertisement

PC CONTROL SETUP (PC CONTROL SET)

Changing Set Entries

The 2 types of entry pallets are shown below.
Numeric Pallet (for addresses)
(IP ADDRESS SET)
IP ADDRESS :130.141.110.204
0123456789
Alphanumeric Pallet (for User ID and Password)
(USER ID SET)
USER ID :USER1
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789
13
English
All manuals and user guides at all-guides.com
END
BS END
Example 1: Changing the addresses from
"130141.110.204" to
"131.141.110.204" with the numeric
pallet.
1
Use the CURSOR button to select the "í"
or "ü" field.
(IP ADDRESS SET)
IP ADDRESS :130.141.110.204
0123456789
2
Press the SET button as many times as
needed to place the shaded correction
cursor (ú) over the "T".
(IP ADDRESS SET)
IP ADDRESS :130.141.110.204
0123456789
3
Use the CURSOR button to select "0" from
the numeric pallet, then press the SET
button.
(IP ADDRESS SET)
IP ADDRESS :131.141.110.204
0123456789
4
Use the CURSOR button to select "END"
from the numeric pallet, then press the
SET button.
END
END
END

Advertisement

Table of Contents
loading

Table of Contents