Lan Kit Setup; Setup Instructions - Sanyo VA-LANC100 Instruction Manual

LAN KIT SETUP

Setup Instructions

Please follow the steps below to use the digital recording camera on a network.
1 USB Driver and Software Installation
Use the included CD-ROM for installing the USB driver and software onto the computer to be connected. For
installation steps, see the manual titled Digital Recording Camera Utility Software 1.6.
2 Firmware Upload
Use the included CD-ROM to replace the firmware (permanent software) in the camera.
1
Insert the CD-ROM into the computer's CD-ROM drive.
2
Turn on the camera, then connect the USB cable between the computer and the camera.
3
From the Windows Start menu, choose Run.
4
Type in "D:Uploader.exe".
("D" indicates the computer's CD-ROM drive. If the drive is different, please enter the correct drive
letter.)
5
Click the OK button.
The "SANYO Firmware Uploader" window will appear.
6
Click the Upload button.
The "Open" window will appear.
7
Make sure the overwriting software file
SX19X76r.bin is selected, then press the
Open button.
The "Upload" window will appear.
All manuals and user guides at all-guides.com
2
English