Table of Contents
Advertisement
LAN KIT SETUP
8
Click the Yes button.
Overwriting of the firmware will start.
9
After the firmware overwriting action has
been completed, turn off the camera's
power.
3 PC Control Setup
The four setting adjustments listed below must be made directly on the camera with the camera's menu
before the camera can be used on a network. These setting adjustments must be made before installing the
LAN adapter. For details, see "PC CONTROL SETUP (PC CONTROL SET)". (
SET THE RECORDING SPEED (RECORDING SPEED SET)
CHOOSE THE NETWORK SETTINGS (NETWORK SET)
4 LAN Kit Installation
The following explains how to install the LAN kit and connect the network.
Use an Ethernet cable for the network cable.
Note: Make sure the camera power is Off before installing the LAN kit.
1
Use a screwdriver to remove the set screw
A, then slide the operation panel cover to
the left and remove it.
The removed cover is not used when the LAN
kit is in place.
3
English
All manuals and user guides at all-guides.com
P. 8)
A
Advertisement
Table of Contents
