Download Print this page

Peavey Transtube Series Operating Manual page 11

Modelling amplifiers
Hide thumbs Also See for Transtube Series:

Advertisement

Available languages

Available languages

TRANSFORMER 112
TRANSFORMER 212
24
23
EFX
21.
SEND/RETURN
This pair of 1/4" jacks supplies an effects SEND and RETURN path for the preamp signal.
Connect the SEND jack to the input of external, low-level, signal processing equipment
(effects). The SEND jack is a stereo (TRS) jack allowing connection to stereo outboard effects
as well as a second combo amp like the Transformer. Return the signal from your external
equipment to the RETURN jack. This is known as an Effects Loop since the signal exits your
amp (send) and loops (return) back to it. When using external effects in stereo you may wish
to return the left signal back to the RETURN jack and send the right signal to an additional
outboard amplifier or a second Transformer . The TRS SEND jack is wired with the tip as the
left signal (which goes to the speaker) and the ring as the right signal. When a mono plug
(standard guitar cable) is partially inserted to the first click of this jack, it can be linked to the
input of an auxillary amp to achieve stereo sound. Refer to the Recommended Hookup
Diagram on page 12 for more info on using this feature. Also see page 22 to find out how to
switch the outputs to stereo mode.
HEADPHONE
22.
HEADPHONE JACK
This stereo 1/4" jack accepts a standard pair of headphones. Using this jack defeats the
output to the speaker making it ideal for quiet practice applications. Although the signal is
sent through a stereo connector, the signal is mono and the sound heard in the left earpiece
will be a duplicate of that heard in the right.
MIDI
23.
MIDI IN/FOOTSWITCH
The MIDI In eight-pin DIN is used to receive MIDI commands from an external MIDI device or
controller. The eight-pin DIN connector will accept both five-pin standard MIDI cables as well
as Peavey's eight-pin MIDI/Communication combo cable. By using the eight-pin cable, this
DIN connector provides the connection and power for the PFC 4 footswitch (supplied). Refer
to the MIDI/Footswitch section and the Application Notes for more information on this feature.
All manuals and user guides at all-guides.com
24
23
22
11
21
21

Advertisement

loading

This manual is also suitable for:

Transtube transformer 212Transtube transformer 112