Radio Data System (Rds) In Fm Broadcasting - Panasonic CQ-DFX883N Operating Instructions Manual

Radio Basics
1
Press
MONO/LOCAL
Setting
For using the remote control, hold down
Note: In AM mode, only
LOCAL can be selected. 2
Press
3
Press (SET) to confirm the function.
4
Press
5
Press (SET).
6
Press
For using the remote control, hold down
MONO (Monaural)
Noise reduction when the receiving sensitivity becomes low
LOCAL
Setting when searching for a station
12
CQ-DFX883N
(MENU) to display the menu display.
MENU
(MENU) for 2 sec. or more.
SEL
} {
( ) or ( ) to select a mode to be adjusted.
} {
( ) or ( ) to switch on and off.
(MENU) to confirm the adjustment.
MENU
(MENU) for 2 sec. or more.
SEL
: Receiving in stereo (Default)
: Receiving in mono and reducing the noise level (
lights.)
: Searching even for a relatively low-intensity radio wave sta-
tion (Default)
: Searching only for a high-intensity radio wave station
( lights.)

Radio Data System (RDS) in FM Broadcasting

Useful functions such as AF, TA, PTY, etc. are available in the RDS (Radio Data System)-ready areas.
CQ-DFX883N
TA
TA receiving display
Program Service Name
TAon Indicator
AF Indicator
TP indicator
Lights up while receiving a TP station
(that broadcasts TA).
Display change
Press
(DISP) to change.
PS
Frequency
CT Clock Time
Notes:
¡ The PTY language can be selected.
(a Page 17)
¡ Refer to page 16 for other RDS functions.
AF (Alternative Frequency) ON/OFF
(a Page 14)
When receiving conditions become bad, a station broad-
casting the same program with better receiving conditions
is automatically tuned in to. (Default: ON)
OPEN
Holding down (AF) for 2 sec. or more toggles AF on
and off.
Note: This operation is not adjustable by the remote con-
trol.
(AF toggling display)
AF indicator
TA (Traffic Announcement) ON/OFF
(a Page 14)
TP (Traffic Program) can be preferentially received.
(Default: OFF)
Pressing (TA) toggles TA on and off.
TA
(TA on display)
TAon indicator
PTY (Program Type) ON/OFF
(a Page 15)
A station can be specified by a genre instead of a frequen-
cy.
Holding down (PTY) for 2 sec. or more toggles PTY
mode on and off.
Note: This operation is not adjustable by the remote con-
trol.
(PTY on display)
PTY mode indicator
Receiving station PTY
CQ-DFX883N