Display Setting - Panasonic CQ-C8405U Operating Instructions Manual

Display Setting

Adjustment to display on the DISPLAY menu
1
Press [MENU] to display the menu
display.
For using the remote
control, hold down
[SEL] (MENU) for 2
sec. or more.
2
Press []] or [[] to display the
DISPLAY menu.
3
Turn [VOL] to select a function to be
adjusted.
For using the remote
control, use [}] or
[{].
4
Press [PUSH
SEL] to adjust.
For using the remote control, use [BAND] (SET).
5
Adjust the setting value.
6
Press [PUSH SEL].
For using the remote control, use [BAND] (SET).
7
Press [MENU] to close the menu
screen.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
DEMONSTRATION
Switching by [PUSH SEL].
ON:
OFF:
30
CQ-C8405U/C8305U
MUTE
SBC-SW
MUTE
SBC-SW
Demonstration screen at no operation
(default)
Regular screen
GRAPHIC PATTERN
(Default: All)
Turn [VOL] to make a selection.
SOURCE PWR
SQ
All:
MENU
DIM
TUNE
TRACK
Pattern A-D
FOLDER/P-SET/DISC
・
D M
LIST
STILL IMAGE PATTERN
(Default: All)
Turn [VOL] to make a selection.
All: Sequential display from pattern 1 to 10
No.1-10
SOURCE PWR
SQ
MENU
DIM
TUNE
TRACK
FOLDER/P-SET/DISC
D ・ M
LIST
CLOCK ADJ
Note: Adjust the clock when "ADJUST" appears on the
display.
[ [ ] :
Adjusting minutes
[ ] :
]
Adjusting hours
q :
Forward
w :
Backward
Notes:
¡ The graphic pattern and still image are changeable.
(a page 31)
¡
If corrupted data is selected, "DISPLAY FILE INCOM-
PLETE" appears.
Sequential display from pattern A to D.
(a page 32)