Adjustment Procedure; Driver Set-Up - Panasonic TH-58PH10EK Service Manual

8 Adjustment Procedure

8.1.

Driver Set-up

8.1.1. Item / Preparation
1. Set Aging pattern 0 (Vset adjustment pattern) by IIC mode.
2. Set the picture controls as follows.
Picture menu: Standard
Picture: +25
Aspect: Full
Caution
1. First perform Vsus adjustment.
2. Confirmation of Vscn voltage should be performed after
confirmation of Vad adjustment.
When Vad=-100V, Voltage of Vscn is 45V ±4V.
8.1.2. Adjustments
Adjust driver section voltages. (Refer to the panel data on the
panel label).
Check or adjust the following voltages with the multimeter.
Name Test Point Voltage
Vsus TPVSUS Vsus ± 2V
(SS)
Ve TPVE (SS) Ve ± 1V
Vset TPVSET 320V ± 7V
(SC)
Vad TPVAD (SC) -100V ± 1V
Vscn TPVSCN Vad + 145V ±
(SC) 4V
Vda TPVDA (SS) 75V + 1V, -2V Fixed
Vbk TPVBK (SC) 155V ± 1V
*See the Panel label.
21
TH-58PH10BK / TH-58PH10EK
Volume Remarks
VR251 (P) *
VR6000 (SS) *
Fixed
VR6600 (SC)
Fixed
VR6604 (SC)