Oregon Scientific VIBRA Trainer Fit SE211 User Manual page 20

3. VIBRA Trainer Fit Pro only - press SET to navigate to 1 of the
4. Press and hold SET until the first setting flashes.
5. Press ST / SP / + or MEM / - to change the setting. Hold to
6. Repeat step 5 to change other settings for this mode.
The order of the user profile settings is:
•
•
•
•
•
•
•
•
•
NOTE
upper heart rate limit will be set automatically. However, you can
manually change your upper and lower heart rate limit if the
automatic setting does not suit you. If you change the target activity
level, your upper / lower and maximum heart rate will automatically
be updated.
SE211 English R3 OP
All manuals and user guides at all-guides.com
3 exercise profiles.
speed through the options. Press SET to confirm the setting
and move on to the next one.
Target activity - 0 to 2
Lower limit heart rate
Upper limit heart rate
Resume vibration mode (only appears when the battery is low,
this warning enables you to resume vibration mode or turn it
OFF to save power)
Heart rate alert
Exercise timer - hour
Exercise timer - minute
Warm-up timer - set to 5, 10, 15 to activate or 0 mins to
deactivate timer
Rest timer - ON / OFF (VIBRA Trainer Fit Pro only)
Once you have set your exercise profile your lower and
19
Black
19
8/28/04, 3:50 PM