Subscribe to Our Youtube Channel
Related Manuals for Oregon Scientific GP801 Speed + Distance System
Summary of Contents for Oregon Scientific GP801 Speed + Distance System
- Page 1 INSTRUCTION MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG MANUALE DE ISTRUZIONI INSTRUCCIONES DE FUNCIONAMIENTO MANUAL DE INSTRUEÇÕS GEBRUIKSAANWIJZING INSTRUKCJA UZYTKOWANIA...
-
Page 2: Table Of Contents
Oregon Scientific Speed & Distance System MODEL NO.: GP801 USER MANUAL TABLE OF CONTENTS Now You Know—How Far? How Fast? ....... 3 How It Works ................. 4 Sports Watch Features ............5 Speed and Distance System Features ........ 6 Useful Applications of the Speed and Distance System ... 6 A True Multi-Sport System ........... -
Page 3: Now You Know-How Far? How Fast
Declaration of Conformity ............ 32 NOW YOU KNOW — HOW FAR? HOW FAST? With the Oregon Scientific GP801 Speed and Distance System, you have useful, accurate, and fun performance information at your fingertips. Now you can answer the all-important questions, “How far? How fast?”... -
Page 4: How It Works
T h e S p e e d a n d D i s t a n c e Monitor uses information from 24 GPS satellites to accurately and continuously calculate your speed and distance. That information is then transmitted to the Oregon Scientific GP801 Speed & Distance Watch. Speed and Distance Transceiver Oregon Scientific GP801 Speed and... -
Page 5: Sports Watch Features
The Oregon Scientific GP801 Speed and Distance Watch receives and displays your speed and distance right on your watch. SPORTS WATCH FEATURES All by itself, this is a great sports watch with: • Time and date • Month, day and date display •... -
Page 6: Speed And Distance System Features
Countdown Timer • Countdown timer with stop, repeat or start chronograph at end Alarm • Separate daily, weekday and weekend alarms • 5-minute backup alarm SPEED AND DISTANCE SYSTEM FEATURES When you add the Speed and Distance Transceiver, you have so much more: •... -
Page 7: A True Multi-Sport System
A TRUE MULTI-SPORT SYSTEM The Oregon Scientific GP801 Speed and Distance System can be used to enhance your enjoyment of a wide variety of outdoor sports including: • Running • Paddling • Walking • Boating • Hiking • Biking • In-line skating •... -
Page 8: Key Features
KEY FEATURES TRANSCEIVER GP801 WATCH ARM UNIT Backlight Mode Transceiver ON/OFF Speed and Distance Display Status Start/Stop Indicator Split/Reset/Set Scroll up CARRYING POUCH BELT CLIP ARM BAND... -
Page 9: Operating The Speed And Distance Transceiver
OPERATING THE SPEED AND DISTANCE TRANSCEIVER Inserting the Batteries The Speed and Distance Monitor operates on three AAA batteries (included). To insert the batteries, open the back of the case by lifting and turning the latch ring 1/4 turn counter-clockwise. Lift the back off. - Page 10 To wear the Transceiver on your upper arm: Loosen the adjustable armband and wrap the unit around your upper arm. Pull the armband so that it fits snugly around your arm. Fasten using hook and loop closure. NOTE: if the armband is not attached to the unit, rethread with the back of the case removed from the unit as shown below, making sure the smooth side faces out (hook and loop closure faces back).
- Page 11 To wear the Transceiver clipped to your belt: Open the back of the case by lifting and turning latch ring 1/4 turn counter-clockwise. Lift the back off. Remove armband from the back of Transceiver. Attach the beltclip to the back of the case by fitting tabs in bot- tom part of two-part clip into the vertical slots on either side of back, as shown below (1).
-
Page 12: Using The Gps System
Using the GPS System The GPS system acquires information from satellites in orbit around the Earth to determine your speed and distance traveled. For the unit to work properly, you must be outdoors in an area with a clear view of the sky. While outdoors in an open area, press and hold the TRANSCEIVER ON/OFF button to turn on the receiver. -
Page 13: Gps System Messages
GPS System Messages The Oregon Scientific Speed and Distance System is a sophisticated system. During operation, the following messages on the watch will help you maximize the system’s performance. SEARCHING – The GPS Transceiver has just been turned on and is searching the sky trying to acquire signals from enough satellites to function accurately. -
Page 14: Displaying Data
Displaying Data Press the SPEED/DISTANCE button while standing at least 6 feet apart from other users of this system to begin displaying data. The watch will display speed data on the top line as well as a wave symbol in the upper left part of the watch display. If the Transceiver is still searching for satellites, the watch shows SEARCHING. -
Page 15: Operating The Speed And Distance Watch
OPERATING THE SPEED & DISTANCE WATCH Push MODE to scroll through the following modes in this order: Time of Day • Chronograph • Chronograph Recall • Countdown Timer • Speed and Distance Monitor • Odometer • Alarm • Options Automatic Time Correction and Setting: If the watch is receiving GPS data from the transmitter, the system automatically corrects... - Page 16 To Set or Adjust Time Zone 1: 1. Press SPLIT/RESET/SET. Hold to Set appears. 2. Continue holding until Set Time appears. Hours will begin flashing. Press START/STOP to advance the flashing digits. 3. Press MODE to set (in order): MINUTES; DAY OF THE WEEK;...
-
Page 17: Chrono Mode (Chronograph Or Stopwatch)
Chrono Mode (Chronograph or Stopwatch) The Chronograph (Chrono) will time events up to 100 hours. It will store to memory the lap number, lap time, split time, average speed, average pace and distance for each lap taken. A lap time is the time for a segment of an event. -
Page 18: Split Or Lap Timing
Split or Lap Timing Note: The Display can show either Lap or Split time. 1. Reset the chronometer to 00:00:00. 2. Press SPLIT/RESET/ SET to choose lap or split display 3. Press START/STOP to begin timing. During the timing of a lap, the up- per part of the display can show speed and distance data if the Transceiver is operating. -
Page 19: Recall Mode
Recall Mode Chrono Recall allows you to review stored lap information while the Chrono is running or stopped. 1. In Recall mode, press SPLIT/RESET/SET re- peatedly to display, in order, Average Speed, Average Pace, Dis- tance and Lap and Split times for the first lap. -
Page 20: Timer Mode (Countdown Timer)
Timer Mode (Countdown Timer) The Timer will count down from a set length of time up to 100 hours. At the end of the countdown, the Timer will optionally a) Stop at End, b) Repeat at End or c) Stop and Start the Chronograph (Chrono must be reset). -
Page 21: Monitor Mode
Timer Operation: 1. Press START/STOP to start the Timer. Original time or speed and distance will be shown in upper display, while remaining time will be shown in main display. 2. Press START/STOP to stop Timer. Press again to resume or SPLIT/RESET/SET to reset to original setting. -
Page 22: Odometer Mode
The last choice displayed will be selected and the information will appear in the upper line of Monitor. The Main display will show distance traveled. 2. Press START/STOP to pause data accumulation. 3. To clear accumulated data, press and hold SPLIT/RESET/SET. Odometer Mode The watch keeps track of the total distance received... -
Page 23: Options Mode
2. Press START/STOP to change the flashing display. 3. Press MODE to change TENS OF MINUTES, then again to set MINUTES, and again to set Alarm type (Daily, Weekday or Weekend). 4. Press SPLIT/RESET/SET to save and exit Set Alarm mode. Alarm ON or OFF Setting: In Alarm mode, press START/STOP to turn the alarm ON or OFF. - Page 24 SMOOTHING – This feature makes pace and speed values easier to read while using the watch by “smoothing” out any small variations in speed. You might want to enable this feature if you are viewing pace information and the displayed numbers appear too “jumpy.”...
-
Page 25: Water Resistance
WATER RESISTANCE The watch is water-resistant up to 50 meters. The transceiver is splash-resistant. Refer to the table below for proper use guide- lines for the watch. SHOWERING SHALLOW DIVING / SNORKELING / RAIN (WARM / COOL LIGHT SWIMMING SURFING / DEEP WATER SPLASHES, ETC WATER ONLY... -
Page 26: Maintenance
MAINTENANCE The GPS Transceiver and its strap should be rinsed in fresh water to avoid the buildup of materials that can interfere with the measurement of your speed and distance. WATCH BATTERY REPLACEMENT To avoid the possibility of permanently damaging the watch, WE STRONGLY RECOMMEND TAKING YOUR WATCH TO A LOCAL RETAILER OR JEWELER TO HAVE THE BATTERY REPLACED. -
Page 27: Warnings
To change the batteries, open the back of the case by turning the latch ring 1/4 turn counter-clockwise. Lift the back off. Remove the old batteries. Insert new batteries according to the markings inside the battery compartment. Always remove dead batteries from the unit. Never mix old and new batteries. - Page 28 • Do not subject the product to impact, shock, extreme temperatures or humidity, wind-born sand, hot water, or water depths greater than those specified in this manual. • Take special care when handling a damaged LCD display, as the liquid crystals can be harmful to your health. •...
-
Page 29: Specifications
SPECIFICATIONS Watch: Measurement units Distance (kilometer / mile), Current Speed (kilometer per hour / mile per hour) and Distance Current / Average / Max Speed (kph / mph) Current / Average / Best Pace (kph / mph) Transceiver: Reception range about 1 meter (3 feet) (low battery, electrical equipment and engines may... - Page 30 Alarms Daily / weekday / weekend / 5-minute backup Time Zones 2 (+/- 23 hours) Auto Correction Uses GPS receiver (default Greenwich Mean Time) Alerts: Beep Alerts Hourly On button press Zone (min / max speed or pace) Distance (every m/km) Chronometer: Measurement units 99:59:59 (hours:min:sec)
-
Page 31: Additional Resources
ADDITIONAL RESOURCES Visit our website ( www.oregonscientific.com) to learn more about your new watch and other Oregon Scientific products such as digital cameras, alarm clocks, and weather monitoring systems. The website also contains contact information for our customer service department, in case you need to reach us. -
Page 32: Declaration Of Conformity
R&TTE Directive 1999/5/EC. Alan W.L.WOO Manager, Quality Assurance Date: 15 February 2003 R&TTE Compliant Countries: All EC countries, Switzerland CH And Norway N 2003 Oregon Scientific. All rights reserved. - Page 33 WARNING: It is your responsibility to use the Oregon Scientific GP801 Speed+Distance System in a safe manner and to maintain full awareness of all conditions and surroundings at all times. Consulting the Oregon Scientific GP801 Speed+Distance System while moving is unsafe and could result in collision or other accident causing damage and personal injury to yourself or others.
Need help?
Do you have a question about the GP801 Speed + Distance System and is the answer not in the manual?
Questions and answers