Water Level - Philips AC4084 User Manual

Note
•
If you do not set the humidity level, the HUMIDITY
SET light goes off. The humidifier humidifies the air
under AUTO mode and the preset humidity level
is 50%.
•
If you change the fan speed (SILENT,
humidifier automatically operates according to the
fan speed level and the AUTO mode deactivates.
•
If you want to increase the humidity level in shorter
time, you can select higher fan speed.
•
The appliance comes with a smart memory function,
it can memorize the settings when the appliance
is switched off (e.g. electricity shortage). When
the appliance is plugged in/switched on again, it
automatically starts at the previous setting.
Water level
The water level in the water bucket is visible
through the water level window on the side
of the appliance. When there is not enough
water in the water bucket, the REFILL
WATER light flashes to indicate that you have
to refill the water bucket.
Note
•
Appliance can operate under air purification only
when the water in the bucket is out and the REFILL
WATER light flashes. Humidification function can
only be activated when the bucket is filled with
water.
EN EN
16
or ), the