Table of Contents
Advertisement
4 – Recording—Advanced recording
automatic track increment.
Digital recording from CD, MD and DAT
level
You may find it helpful to use the track restriction
facility (see 4.2.4, "Restricting the number of
tracks") together with the automatic track division.
For instance, if you have recorded two albums on one
DAT tape, and you wish to make two separate CDs
from this tape, you can use the
to set the number of tracks to the number of tracks
comprising the first album.
When the final track of the first album has been
recorded, the unit automatically performs the PMA
writing procedure and enters stop mode.
4.3.3
Digital direct
As mentioned earlier, the digital direct mode
bypasses some of the input circuitry of the CD-
RW2000 (the frequency convertor and the digital
level control) to write directly to the disc.
To enable or disable digital direct recording:
1 Ensure that the input source is set to
(either
,
AES/EBU
COAXIAL
2 Press the
MENU
key (
the display shows
where
is the current setting, either
or
.
3 Turn the
MULTI DIAL
H
keys
to change setting to
SKIP
When digital direct recording is enabled, the
indicator in the display flashes slowly
DIGITAL
when the unit is in record ready mode, or is
recording.
NOTE
As mentioned earlier, the digital direct feature
bypasses the frequency convertor. Recording is
therefore only possible from sources recorded with
44.1 kHz sampling frequency.
If digital direct is selected, the digital volume is
bypassed and the menu item disappears. Once the
digital direct mode is turned off, the level settings pre-
24
TASCAM CD-RW2000
Long "pause"
in signal, but
track is not
incremented
time
MULTI DIAL
control
DIGITAL
or
).
OPTICAL
9
6
or
) repeatedly until
,
B
control
or use the
or
viously made will take effect, and the input volume
may suddenly change.
4.3.4
Rec mute function
The rec mute function allows instant cut-off of the
input signal, and records four seconds of silence on
the disc.
1 While recording is in progress, press the
F
key
.
MUTE
The display shows
stop displaying the current level and the moni-
tored sound is cut.
2 After about four seconds, the unit enters
record ready mode.
NOTE
This function is only available from the remote control
unit. It is not possible to use this function with the
main unit only.
4.3.5
Fade-in and fade-out
To provide smooth beginnings and endings to
recorded tracks, the unit provides fade facilities.
Fade-ins are from – (silence) to the set input level
(4.1.1, "Signal volume") and fade-outs go from the
current input volume to silence.
The fade-in and fade-out times can be set indepen-
dently in increments of one second, from 1 second to
24 seconds.
To set the fade times:
1 Press the
MENU
the display shows
where
is the current fade-in time, in
seconds.
2 Turn the
MULTI DIAL
H
keys
to change the value of the fade-in
SKIP
.
time.
3 Press the
MENU
shows
the current fade-out time, in seconds.
4 Turn the
MULTI DIAL
keys to change the value of the fade-out time.
It is possible to set the fade-in time only (per-
form step 5 after step 2) or the fade-out time
only (in step 1, press the
fade-out time menu item is shown).
To perform the fade-in:
, the meters
9
6
key (
or
) repeatedly until
B
control
or use the
key again so that the display
, where
control or use the
MENU
key until the
REC
,
is
SKIP
Hide quick links:
Advertisement
Table of Contents
