Table of Contents
Advertisement
3.4 CALL playback
L
K
The
keys (
and
CALL
back position to be returned to the point at which
playback last started from pause mode. If there is no
"call point" (i.e. playback starting from pause),
pressing the
key will have no effect. It should
CALL
also be noted that this call function is available in
play and pause modes only.
Note that the call mode is not available when shuffle
mode has been selected (see 3.1.3, "Playback
modes") and there is no "call point" set.
3.5 Auto Ready function
This function allows the playing back of a single
track, and the automatic cueing of the next track
ready for playback.
The unit is cued to the start of the track as determined
by the subcode, not the start of the audio signal,
unless the AUTO CUE function is on (see 3.6, "Auto
Cue function").
The unit will enter pause mode in the continue, shuf-
fle and programmed play modes, after the location
has taken place.
If repeat is active (see 3.3, "Repeat play"), the unit
will enter play ready mode at the start of the next
track (
), or the start of the track which is
REPEAT ALL
being repeated (
).
REPEAT 1
To set the function:
1 Repeatedly press the
until the display shows
where
is either
2 Use the
control
MULTI DIAL
H
keys
to set the function to
When the function is on, the
indicator is lit.
3.6 Auto Cue function
The Auto Cue function allows you to set up the unit
so that when a track is selected for playback in pause
mode (cued), playback will start, not at the first posi-
3 – Playback operations—CALL playback
) allow the unit's play-
9
6
MENU
key (
or
)
or
.
B
or the
SKIP
.
display
A-READY
tion of the track as indicated by the subcode, but at
the first position of the track where the audio level
exceeds a set trigger level.
The trigger level is the same as the recording trigger
level, as set in 4.3.1, "Synchronized recording". Con-
sult this section on how to set the trigger level.
To set the Auto Cue function on:
1 Repeatedly press the
until the display shows
where
is either
2 Use the
MULTI DIAL
control
H
keys
to set the function to
When the function is on, the
cator is lit.
NOTE
When using the Auto Cue function, there may be a
short "click" sound output through the DIGITAL
COAXIAL and OPTICAL OUT terminals (
as the unit locates to the audible start of the track just
before it enters pause mode. However, this sound will
not be output through the DIGITAL AES/EBU OUT
W
terminal
.
3.7 Incremental play
Incremental playback means that when the
G
I
or
is pressed (or if a STOP signal is received
through the
connector
CONTROL
is being played back, the playback position will be at
the start of the next track.
H
If the
key
is pressed while the incremental
PLAY
playback mode is on, playback starts from the start of
the next track.
To set the incremental play mode on:
1 Repeatedly press the
until the display shows
where
is either
2 Use the
control
MULTI DIAL
H
keys
to set the function to
Although there is no indication when the incre-
mental play mode is selected, you will notice
that is in operation whenever you stop play-
back of a track.
TASCAM CD-RW2000
9
6
key (
or
)
MENU
or
.
B
or the
SKIP
.
display indi-
A-CUE
X
Y
and
STOP
key
T
) while a track
9
6
MENU
key (
or
)
or
.
B
or the
SKIP
.
17
)
Hide quick links:
Advertisement
Table of Contents
