3-Preparations For Use; Making Connections - Tascam HD-R1 Quick Start Manual

Making connections

USB media
USB computer
keyboard
Connecting the power
Connect the included power cord to the
on this unit and a standard power outlet.
Connecting the recording source
Connect analog sources to the
Euroblock. Balanced mics and line level sources can
be connected to the XLR jacks, −10 dBV unbalanced
line level sources can be connected to the RCA jacks,
and +4 dBu balanced sources can be connected to the
Euroblock.
Connect digital sources to the
unit accepts S/PDIF digital, but does not accept AES/
EBU digital sources.)
Connecting output destinations
Use the XLR or RCA
LINE OUTPUTS
to connect analog output destinations.
Use the jack to connect digital output
DIGITAL OUT
destinations. (This unit works with S/PDIF, but not
with AES/EBU digital sources.)
3–Preparations for Use
Mixer
connector
~IN
or the
MIC/LINE INPUTS
jack. (This
DIGITAL IN
or the Euroblock
LAN Cable
External controller
Connecting headphones for monitoring
Connect stereo headphones to the front panel
jack.
Connecting a keyboard for text input
Connect a keyboard to the front panel USB port.
USB
Connecting USB memory to copy files
Connect the USB media (flash memory) to the front
panel port.
USB
Connecting an external parallel controller
Connect a parallel controller to the
connector on the rear panel.
Connecting an external serial controller
Connect a serial controller to the
on the rear panel.
Connecting a LAN cable for remote control
and file transfer
Connect the unit using the
panel.
Headphones
Computer
Power outlet
PHONES
PARALLEL
connector
RS-232C
connector on the rear
LAN
7
TASCAM HD-R1