Creating Playlists; Setting The Current Playlist - Tascam HD-R1 Quick Start Manual

6–Folders and Playlists

Creating playlists

In playlist playback mode, this unit plays audio files
(tracks) that have been added to the current playlist.
There are no playlists on a CF card that has just been
formatted. You can make as many playlists as needed.
NOTE
When the playback mode is set to Playlist, new files
created in recording are added to the current playlist.
Create playlists using the following procedures.
1 Press the key.
MENU
The Main Menu appears.
2 Use the
SHUTTLE/DATA
, and press the
Playlist
The Playlist Menu appears.
NOTE
When the Home Screen is open, press the SKIP ≤ key
while pressing and holding the MENU key (SHIFT key) to
open the Playlist Menu directly.
3 Use the
SHUTTLE/DATA
, and press the
New Playlist
A playlist called "
Playlist00
and this playlist becomes the current playlist.
4 With
Playlist00 (current)
press the key.
ENTER
A screen showing the contents of the playlist
opens. The newly created playlist does not have
any files yet, so only "
as in the following screen.

Setting the current playlist

When the playback mode (See "Setting the playback
mode" on page 14) is set to Playlist, the playback
area is the current playlist. Use one of the following
operations to set the current playlist.
Using the menu to set the current playlist
1 Follow steps 1 and 2 in "Creating new playlists"
to open the Playlist Menu.
16
TASCAM HD-R1
wheel to select
key.
ENTER
wheel to select
Create
key.
ENTER
" is created,
selected,
" is shown,
Add Entry
Add files to the playlist using the following
procedures
5 With " " selected, press the
Add Entry
key.
The files and folders at the top level of the card
appear.
To show the files and folders inside a folder,
select the folder and press the
6 Select the file that you want to add the playlist,
and press the key.
ENTER
The file is added to the playlist.
The playlist content screen reopens, so you
can confirm that the file has been added to the
playlist. Instead of the "
"
Add Entry To Bottom
or more files have already been added.
7 To add more files to the playlist, select "
Entry To Bottom
key.
The same screen appears as in procedure 5
above.
8 Select the file you want to add to the playlist
and press the key as in procedure 6
ENTER
above.
The file is added to the end of the playlist, and
the playlist content screen reopens.
9 Repeat steps 7 and 8 as necessary.
You can also edit the names of playlists, as well as
copy and delete them. You can also change the order
of the added files, remove files from playlists, and
set playback start and end points, set Fade In and
Fade Out, and set playback volume, for example. For
how to conduct these operations, see "Playlist" in the
Owner's Manual.
2 Use the
SHUTTLE/DATA
desired playlist, and press the
This loads and becomes the current playlist.
Using the panel keys to set the current playlist
≤ or
Press the
SKIP SKIP
and holding the key. The current playlist is
MODE
changed in alphabetical order.
ENTER
key.
ENTER
" item,
Add Entry
" appears if one
Add
" and press the
ENTER
wheel to select the
key.
ENTER
µ keys while pressing