Tascam HD-R1 Quick Start Manual page 12

4–Recording
7 Use the
SHUTTLE/DATA
, and press the
Channels
Set the record channel mode with this item.
8 Use the
SHUTTLE/DATA
channel mode, and press the
Stereo: records in stereo
•
Mono Right: records R channel input in mono
•
Mono Left: records L channel input in mono
•
9 Use the
SHUTTLE/DATA
, and press the
Source
Set the record input source with this item.
10 Use the
SHUTTLE/DATA
input source, and press the
Analog/Mic: sets the input source to the MIC/LINE
•
INPUTS (XLR, RCA or Euro connectors) on the rear
panel
S/PDIF: sets the input source to the DIGITAL IN jack
•
on the rear panel
NOTE
If Analog/Mic is selected, the switches on the rear panel
also need to be set. See step 13 below.
12
TASCAM HD-R1
wheel to select
key.
ENTER
wheel to select the
key.
ENTER
wheel to select
Input
key.
ENTER
wheel to select the record
key.
ENTER
11 As necessary, conduct other settings related to
recording.
See "Record settings" in the Owner's Manual for
more details about those items.
12 When setting is completed, press the
to return to the Home Screen.
13 If was selected in procedure
Analog/Mic
10 above, set the switches on the rear panel
according to the analog input used as follows.
When using XLR inputs:
• Set the switch to
INPUT XLR
• Set the and
L INPUT R INPUT
If the input level is too high, use the −20 setting,
which engages a 20 dB pad.
• If a condenser mic that requires +48V phantom
power is connected set the
When using the Euroblock:
• Set the switch to
INPUT TRMNL
When using the RCA INPUT:
• Set the switch to
INPUT XLR.
• Set the and
L INPUT R INPUT
key
MENU
.
switches to or .
0 −20
switch to .
PHANTOM ON
switches to .
RCA