Door Glass Replacement - Napoleon GT8P Installation And Operation Manual

9.3

door glass replacement

WARNING
!
• Do not use substitute materials.
• Glass may be hot. Do not touch glass until cooled.
• Care must be taken when removing and disposing of any broken door glass or damaged components. Be
sure to vacuum up any broken glass from inside appliance before operation.
• Do not strike, slam, or scratch. Do not operate appliance with glass removed, cracked, broken, or scratched.
Replacement glass/frame assembly shall be replaced as a complete unit as supplied by the appliance
manufacturer.
Having removed the door, lay on a smooth flat surface,
face down. There are 4 glass retainers that need to be
bent away from the glass to release it from the frame.
Do not pry on the glass.
When replacing DO NOT SUBSTITUTE MATERIAL,
replace the gasket (W562-0008) and the glass (W300-
THIS TEMPLATE MUST BE USED WITH 38.1
0088). Set new glass into the frame and gently bend
tabs into the gasket to secure.
NOTE: Care must be taken when removing
and disposing of any broken glass or damaged
components. Be sure to vacuum up any broken
glass from inside the appliance before operation.
38.1
GLASS
GLASS
RETAINERS
* When installing the door glass ensure that the gasketed end is placed into the top of
the door frame.
maintenance
38.1.1
GASKET*
TOP
W415-1367 / B / 01.09.19
EN
33