Facts And Figures (Specifications) - Tascam D00851300A Owner's Manual

(continued from the previous page)
Footswitch polarity
This function allows you to set a polar-
ity suitable for the footswitch that you
are using.
Select in the Setup menu, and set it
POL
to either (NORMAL) or
NOR
VERT) by pressing either the
DOWN key.
Disc types
AD/DA
Nominal output level
(LINE OUT)
Maximum output level
(LINE OUT) without
(IN-
INV
distortion
UP or
Output impedance
Maximum output level
(PHONES)
Nominal input levels
LINE IN
BASS IN
Voltage requirements
Power consumption
Dimensions (w x d x h)
including feet
Facts and figures (specifications)
8 cm single, 12 cm Weight (excluding
CD batteries)
16-bit
CD playback characteristics
–10 dBV
Frequency response
0 dBV (1 Vrms)
Dynamic range
S/N ratio
1 kΩ
> 18mW (into 32 $ )
THD
Digital signal processing
–10 dBV
 Specifications and the appearance
–15 dBV (Passive)
of the CD-BT1MKII may change
–10 dBV (Active)
without notice for improvement
DC 9V (PS-PS5 AC
reasons.
adapter)
 The illustrations in this manual
AA batteries x 4
may differ slightly from the actual
(NiMH or alkaline)
product.
4W (PS-PS5 AC
adapter)
232 x 138 x 40
(mm) / 9.1 x 5.4 x
1.6 (in)
620g / 1 lb, 6 oz.
20 Hz to 20 kHz
±1.0 dB
> 88 dB
> 88 dB
< 0.01%
32-bit
TASCAM CD-BT1MKII —
25