Changing Your Preferences For The Cd-Bt1Mkii - Tascam D00851300A Owner's Manual

Changing your preferences for the CD-BT1MKII

Use the Setup menu to make changes
to the setup of the CD-BT1MKII.
To open the Setup menu, press and
hold down the TUNER/SETUP
Press either the PREV or NEXT
select between menu items, and press
either the UP or DOWN key to select
values.
Mix balance
This function allows you to adjust the
mix balance between the bass guitar
sound and the CD sound.
Select in the Setup menu, and select
MIX
a value between B (Bass) 10 – B1, 0, C
(CD) 1 – C10.
CD playback mode
This function allows you to set the CD
playback mode.
Select in the Setup menu, and set
PLAY
it to either (plays all tracks) or
ALL
(plays a single track).
24
— TASCAM CD-BT1MKII
CUE key function
This function allows you to set the
function of the
key.
Select in the Setup menu, and set it
CUE
to either or
CUE
playback is paused at the last
CUE:
point where playback started.
key to
playback starts automatically
FLS:
from the last point where
playback started.
key and
UP DOWN
The function of the
keys when you are in the home display
mode can be set so that they change the
value of the menu item that you select.
This can be a useful shortcut.
Select in the Setup menu, and
UPDN
select one of the four functions by
pressing either the
Choose from the following list:
: mix balance (See Changing
MIX
your preferences)
: CD playback tempo (See
TMP
SGL
Pitch and tempo changes)
CUE key.
(FLASH).
FLS
key function
UP and DOWN
UP or DOWN key.
key control (See Pitch and
KEY:
tempo changes)
fine tuning (See Pitch and
FIN:
tempo changes)
Footswitch function
This function allows you to use a
footswitch such as the recommended
TASCAM RC-30P (sold separately),
to change the effect slot, cue, or CD
rewind/fast forward.
Select in the Setup menu, and se-
FOOT
lect the function from the following:
selects the EQ slot
EQ+:
selects the effect slot
FX+, FX-:
CUE function
CUE, FLS:
selects CD rewind or fast
REW, FF:
forward of the CD
Once you select a function the foot-
switch can be used to operate the func-
tion.
(continued on the next page)