Tascam D00851300A Owner's Manual page 11

Portable cd bass guitar trainer
Table of Contents

Advertisement

forward or fast rewind.
 The speed of the search increases
if you continue to hold either of
these keys pressed down.
14) STOP/MTRO Key [
H
Press this key to stop playback. Press-
ing and holding this key down activates
the metronome menu (See Using the
metronome).
15) PLAY/PAUSE Key [
G
Use this key to start playing a CD.
While a CD is playing, you can pause
playback by pressing this key. Press
again to resume playing.
16) CUE Key
Use this key to return to the cue point
(the point where playback last started).
Use the Setup menu to choose a mode
that the
CUE
key can perform (See
Changing your preferences).
17) PHONES Jack
Connect your headphones here.
18) LINE OUT Jack
Use this port to connect the CD-
BT1MKII to devices such as speakers
with a built-in amplifier, a stereo sys-
tem AUX input jack, a cassette tape re-
corder, or a CD recorder. You can hear
the results of the effects and key chang-
]
es through devices connected here.
19) OUTPUT Control
Use this control to adjust the output
level of the
/
]
OUT
jack. This control adjusts the level
J
of the two jacks together (the two jack
levels cannot be adjusted separately).
20) INPUT Control
Use this control to change the input
level of the
21) LINE IN Jack
Use this stereo jack to connect exter-
nal devices such as a synthesizer, gui-
tar preamplifier, cassette tape recorder,
rack-mount effects unit, etc., to the
CD-BT1MKII. This jack has no level
control, so you must adjust the output
level at the source device.
Part names and functions (Continued)
PHONES
jack and the
LINE
BASS IN
jack.
22) BASS IN Jack
Connect a bass guitar to this jack. Set
the
BASS IN
switch (see 26) according
to the type of bass guitar you are using,
whether passive or active.
23) FOOT Jack
Connect a standard footswitch to
this jack, such as the recommended
TASCAM RC-30P (sold separately).
You can choose from variety of func-
tions to use with a footswitch. (See
Changing your preferences).
24) POWER Switch
This switch turns the power to the
whole unit on and off.
25) CD EFF Switch
This switch turns CD effects on and
off.
26) BASS IN Switch (PASSIVE/
ACTIVE)
You can use both passive and active
bass guitars with CD-BT1MKII. Set
this switch according to whether your
bass guitar is passive or active.
TASCAM CD-BT1MKII —
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cd-bt1 mkii

Table of Contents