Indicator Display - LG PS-P809WF1 Owner's Manual

1.MFL42657821,영어 2016. 4. 20. 오후 6:31 페이지 12
HOW TO USE
12

Indicator display

1. Press the
• Pressing the button each time checks the density of PM10 PM2.5 PM1.0 in turn.
Pressing the Indicator button during operation displays the density of PM10 / PM2.5 / PM1.0
at the display for 10 seconds.
• Check the dust particle size display window.
• Dust density is displayed based on the dust density window with the highest contamination
level.
Exmaple) When PM10 density is 79 (normal), and PM2.5 is 90 (bad), and PM1.0 is 50 (nor-
mal), PM2.5 value is displayed for dust density.
Cleanliness is displayed in 4-level color depending on the contamination level of PM10 / PM2.5 /
PM1.0 and odor.
(contaminated) Red Orange Yellow Green (clean)
• When the displayed cleanliness is above bad/very bad, the cause of bad level (dust/odor) is dis-
played in addition to cleanliness color display.
Overall cleanliness color is displayed based on the worst level among PM10 / PM2.5 / PM1.0
and odor.
Checking method of overall cleanliness
Overall
Status
cleanliness
Red Very Bad
Orange Bad
Yellow Normal
Green Good
❈ Dust density is displayed in the unit of one from 8 to 999.
When it comes to the dust density values, we referred to the data sheets provided by the
sensor supplier.
Indicator button and check the density of PM10 / PM2.5 / PM1.0
Overall cleanliness color display
Dust particle size
10
PM
Dust density (unit μ g/m
PM 10
Equal or above Equal or above
251
151~250
51~150
Equal or below Equal or below
50
Odor Dust
Odor/dust display
Dust density display
3
)
PM 2.5 PM 1.0
Equal or above
116 116
76~115 76~115
36~75 36~75
Equal or below
35 35
Odor density
Status
Level
Very
4
strong
Strong 3
Normal 2
Weak 1