LG PS-P809WF1 Owner's Manual page 13

Table of Contents

Advertisement

1.MFL42657821,영어 2016. 4. 20. 오후 6:31 페이지 13
• Explanation on the display : Since PM1.0 density is Bad(Orange) with 80 μ g/m
the odor/dust display. Since 'odor' is displayed at the odor/dust display, odor density is also
strong. Since PM1.0 is displayed at the dust particle size display, the density level of PM1.0 is
higher than that of PM10 or PM2.5
Reference
• PM10 and PM2.5 cleanliness follows the provided by the MEP. (2015)
- The overall cleanliness level displayed on the product may be different from a level announced by
MEP.
• The dust density level for PM1.0 has been displayed in the same manner as the dust density level for
PM2.5. (LG Electronics standards)
• The displayed density of PM10 / PM2.5 could differ from the forecast of the MEP and from other meas-
urement devices or products.
- Indicated dust concentration values can differ from each other depending on the differences in dust
measuring methods and also from real dust concentration levels.
- The assessment of dust density was made against dust used for LG Electronics standards tests.
• In case you use the product which generates steam and micro particles (humidifier, cooling device,
spray, etc.), micro dust density could change.
• Since the cleanliness display shows overall dust and odor, it could differ from the density value of
PM10, PM2.5, and PM1.0.
• Even in the same space, the PM10 density value could differ from other products due to air circulation.
• The overall cleanliness display could change in response to the chemicals contained in air freshener,
perfume, deodorizer, and cosmetics.
• The displayed dust density value could change depending on the installation environment (affected by
sofa, bed, carpet, vacuum cleaner, humidity, smoke, bugs, fats, etc.)
• The displayed density value of PM10/PM2.5/PM1.0 could change depending on the surrounding envi-
ronment (construction site, road side, plant, etc.)
• The density of micro dust could be measured high near exit doors, windows, and ventilation holes or
under the environment where outside air flows in.
• Do not clean the sensor with other materials other than alcohole or water. It may cause product failure.
※ MEP : Ministry of Environmental Protection the People's Republic of China
Overall cleanliness color display
Dust particle size
Odor Dust
1.0
PM
Dust density display
HOW TO USE
Odor/dust display
3
, display dust at
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

As70gpwf1

Table of Contents