Kia CERATO 2018 Owner's Manual page 59

CRS with universal approval to ECER 44
need to be fixed additionally with a top
tether strap connected to the corre‐
sponding top tether anchorage point in
the back rest.
The installing and the use of a childseat
has to be done according to the instal‐
ling-manual, which is added to the ISO‐
FIX-seat.
WARNING
Install the child restraint seat fully
rearward against the seatback with
the seatback reclined two positions
from the most upright latched posi‐
tion.
WARNING
• When using the vehicle's "ISOFIX"
system to install a child restraint
system in the rear seat, all unused
vehicle rear seat belt metal latch
plates or tabs must be latched se‐
curely in their seat belt buckles
and the seat belt webbing must be
retracted behind the child restraint
to prevent the child from reaching
and taking hold of unretracted
seat belts. Unlatched metal latch
plates or tabs may allow the child
to reach the unretracted seat
belts which may result in strangu‐
lation and a serious injury or death
to the child in the child restraint.
• Do not place anything around the
lower anchors. Also make sure
that the seat belt is not caught in
the ISOFIX anchors.
To secure the child restraint seat
1. To engage the child restraint seat
to the ISOFIX anchor, insert the
child restraint seat latch into the
ISOFIX anchor. Listen for the audi‐
ble click sound.
CAUTION
Do not allow the rear seat belt web‐
bing to get scratched or pinched by
the ISOFIX-seat latch and ISOFIX an‐
chor during installation.
2. Connect the tether strap hook to
the child restraint hook holder and
tighten to secure the seat. (Refer
to Securing a child restraint sys‐
tem with ISOFIX system and
Tether Anchorage system
equipped) on page 3-38.)
3
(if
3-39