Kia CERATO 2018 Owner's Manual page 297

1. In all cases except when creating
multisession discs, check the close
session option before creating the
disc. Though product malfunctions
will not occur, some time may be
required for the device to check
whether the session
closed (approximately 25 seconds).
(Additional time may also be re‐
quired depending on the number
of folders or files.)
2. Changing the MP3/WMA file exten‐
sions or changing files of other ex‐
tensions to MP3/WMA may result
in product malfunction.
3. When naming files with MP3/WMA
file extensions, write using only
Korean and English. (Korean, Eng‐
lish and Chinese are supported.)
4. Unauthorized use or duplication of
music files are prohibited by law.
5. Prolonged use of CD-R/CD-RW
discs that do not satisfy related
standards and/or specifications
could result in product malfunc‐
tion.
NOTICE
n Using the USB Devices
• Connect the USB device after
turning on the engine. The USB
state is
device may become damaged if it
is already connected when the ig‐
nition is turned on. The USB device
may not operate properly if the
car ignition is turned on or off with
the USB device connected.
• Be careful for static electricity
when connecting/disconnecting
USB devices.
• Encoded MP3 Players will not be
recognized when connected as an
external device.
• When connecting an external USB
device, the vehicle's audio system
may not recognize the USB de‐
pending on what firmware is used
by USB device or what files are on
the USB.
(Continued)
(Continued)
• Only products formatted
byte/sectors under 64Kbyte will
be recognized.
• This device recognizes USB devices
formatted in FAT 12/16/32 file
formats. This device does not rec‐
ognize files in NTFS file format.
• Some USB devices may not be
supported due to compatibility is‐
sues.
• Avoid contact between the USB
connector and bodily parts or for‐
eign objects.
• Repeated connecting/disconnect‐
ing of USB devices within short pe‐
riods of time may result in product
malfunction.
• A strange noise may occur when
disconnecting the USB.
• Make sure to connect/disconnect
external USB devices with the au‐
dio power turned off.
(Continued)
with
5
5-57