Kia CERATO 2018 Owner's Manual page 123

And if the power window switch is
pulled up continuously again within 5
seconds after the window is lowered by
the automatic window reversal feature,
the automatic window reversal will not
operate.
NOTICE
The automatic reverse feature for
the window is only active when the
auto up feature is used by fully
pulling up the switch. The automatic
reverse feature will not operate if
the window is raised using the half‐
way position on the power window
switch.
WARNING
Always check for obstructions be‐
fore raising any window to avoid in‐
juries or vehicle damage. If an object
less than 4 mm (0.16 in.) in diameter
is caught between the window glass
and the upper window channel, the
automatic reverse window may not
(Continued)
(Continued)
detect the resistance and will not
stop and reverse direction.
WARNING
The automatic reverse
doesn't activate while
power window system. Make sure
body parts or other objects are safe‐
ly out of the way before closing the
windows to avoid injuries or vehicle
damage.
Short drop (for 2 Door)
When you open the front door(s), if the
front window(s) fully closed, the front
windows will drop down about 0.4 in.
(10mm) automatically. And then If you
close the door(s), the window(s) will be
fully closed automatically. This function
prevents damage to the windows. This
is not a malfunction. This is a normal
condition.
If the windows does not drop down au‐
tomatically because ice has formed
around it, tap lightly the windows to
break the ice. Do not pry on the win‐
dows. If necessary, move the vehicle to
a warm place and allow the ice to melt.
Power window lock button (if
equipped)
feature
resetting
The driver can disable the power win‐
dow switches on the rear passengers'
doors by pressing the power window
lock switch to the lock position (press‐
ed).
When the power window lock switch is
pressed:
• The driver's master control can oper‐
ate all the power windows.
• The front passenger's control can op‐
erate the front passenger's power
window.
4
4-31