Kia CERATO 2018 Owner's Manual page 369

NOTICE
• If the battery is weak or the smart
key does not work correctly, you
can start the engine by pressing
the engine start/stop button with
the smart key.
The side with the lock button
should contact the engine start/
stop button directly. When you
press the engine start/stop button
directly with the smart key, the
smart key should contact the but‐
ton at a right angle.
• When the stop lamp fuse is blown,
you cannot start the engine nor‐
mally.
Replace the fuse with a new one.
If it is not possible, you can start
the engine by pressing the engine
start/ stop button for 10 seconds
while it is in the ACC position. The
engine can start without depress‐
ing the brake pedal. But for your
safety always depress the brake
pedal and clutch pedal (if equip‐
ped) before starting the engine.
CAUTION
• Do not press the engine start/stop
button for more than 10 seconds
except when the stop lamp fuse is
blown.
• Do not turn the ignition switch to
the START position with the en‐
gine running. It may damage the
starter.
Stopping the gasoline engine/
diesel engine (Manual Transaxle)
1. Make sure the vehicle is completely
stopped and keep the clutch pedal
and brake pedal depressed.
2. Shift the transaxle into Neutral
while depressing the clutch pedal
and brake pedal.
3. Engage the parking brake while de‐
pressing the brake pedal.
4. Turn the ignition key to the LOCK
position and remove it.
6
6-15