Kia CERATO 2018 Owner's Manual page 533

5. Remove the socket from the as‐
sembly by turning the socket coun‐
terclockwise until the tabs on the
socket align with the slots on the
assembly.
6. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
7. Insert a new bulb by inserting it in‐
to the socket and rotating it until it
locks into place.
8. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
9. Reinstall the lamp assembly to the
body of the vehicle.
Front fog lamp (if equipped)
1. Disconnect the negative battery
cable.
2. Remove the screws under the front
bumper.
3. Disconnect the power connector
from the socket.
4. Remove the bulb-socket from the
housing by turning the socket
counter clockwise until the tabs on
the socket align with the slots on
the housing.
5. Install the new bulb-socket into the
housing by aligning the tabs on the
socket with the slots in the hous‐
ing. Push the socket into the hous‐
ing and turn the socket clockwise.
6. Connect the power connector to
the socket.
8
8-75