Copy-Protection; Audio Playback - Tascam CD-D1X4 Owner's Manual

Copy-protection

The CD-D1x4 allows copy-protection to be applied
to audio discs produced using the unit.
There are three settings:
• (single-generation copying),
1GENERATION
where one digital copy ("child") can be made from
the recorded disc, but no digital copies ("grandchil-
dren") can be made from the child.
• (may be freely copied), where no copy-pro-
FREE
tection is applied to the recorded disc.
• (copy prohibited) which prevents
PROHIBIT
any digital copies being made from the recorded
disc

Audio playback

Since it is impossible to make a bit-by-bit compari-
son of audio CDs, this function is provided for you to
"audition" a CD copy, using a pair of headphones
connected to the headphone jack of the
one of the slave drives.
Any standard headphones with a 3.5 mm stereo jack
may be used. The volume is adjusted using the
drive's volume control (turn to the right to increase
the volume, and to the left to decrease the volume).
1 Press the key until the display shows
MODE
the following:
P LA Y A UD I O?
2 Press
ENTER:
S EL E CT D R IVE
M AS T ER ?
3 Press to select the
ENTER
keep pressing
MODE
the number of the slave drive you want to
use, and then press
4
The disc tray of the selected drive opens
automatically, and you should then insert the
disc and close the tray.
5
Press ENTER to start playback. While the
disc is being played back:
• Use the
ESCAPE key to stop playback
• Press and hold the
MODE
through a track (playback is muted)
or
MASTER
drive, or
MASTER
until the display shows
.
ENTER
key to rewind
7 – Other functions
1
Press the button until the display
MODE
shows:
S ET UP?
(MO DE
2 Press , and then press
ENTER
screen shows:
> CO PY ID ?
(1G EN ERA TI ON)
3
Press ENTER , and then use the
choose between
1GENERATION
and as explained above.
PROHIBIT
4 Press to confirm the setting.
ENTER
• Press and release the
track
• Press and hold the
ENTER
ward through a track (playback is muted)
• Press and release the
ward a track
The display shows the current track and the
number of tracks on the disc, as well as the
elapsed time on the current track:
T RA CK
P LA Y
While playback is stopped:
• Use the
key to go up one level in the
ESCAPE
menu system.
• Press and release the
backward a track
• Press and release the
ward a track
When playback is stopped, the display shows
the total number of tracks on the disc, as well
as the total recorded time of the disc:
T RA CK
T IM E
NOTE
If the copied CD contains audio errors, you will be able
to hear them, but no message will appear on the dis-
play. If a copied CD contains audible errors, you may
want to consider re-recording at a lower speed, which
will almost certainly reduce the error rate.
CH AN GE)
until the
MODE
MODE key to
,
FREE
key to go back a
MODE
key to fast for-
key to go for-
ENTER
02 /12
03 :13
key to move
MODE
key to go for-
ENTER
12 /12
54 :23
17
TASCAM CD-D1x4