Visual Inspection - Bornack RS-S05 Instructions For Use Manual

Inspection to be carried out prior to
each use
• If even the slightest defect of the PPE is found
in the inspection before use, the PPE must not
be used.
A defective device/component must be che-
cked or repaired only by a BORNACK autho-
rised repair shop.

viSual inSpection

• Fittings, eyes, buckles, karabiners do not have
any obvious damage and are not bent. Karabi-
ner clasp and its safety device are in working
order.
• Check completeness of rail, ladder fastenings
and fall arrest device.
• Rail joints are fast and maximal distance bet-
ween the rails is 3.0 mm.
SaFety proviSionS
FuNCTiON ChECK
• In case of horizontal pull, the fall arrest device
is running freely along at eyelet A and arrests
if pulled downward.
• Spring function at safety catch and karabiner
4 | 5