6-Connection; Connecting Monitors; Connecting External Microphones And An Audio Device; Connecting To The Ext Mic Jacks - Tascam BB-1000CD Owner's Manual

Connecting monitors

You can connect headphones to the
mini jack) and an external audio device (powered speak-
ers, audio system, etc) to the
monitoring.
Powered speakers,
stereo system, etc.
Headphones
NOTE
Slide the SPEAKER switch to OFF to deactivate the built-in speak-
ers. The built-in speakers are automatically deactivated as head-
phones are connected to the PHONES jack regardless of the switch's
position.
CAUTION
The sound through microphones (both built-in and external) does
not come out of the built-in speakers. Use headphones when you
want to monitor it.
Connecting external microphones and an audio
device
The unit can record sounds from external audio equipment
as well as the built-in stereo microphones and you can
record sounds using them. You can connect the equipment
to the jack and the external microphone jacks. See
LINE IN
below how to connect them (For settings of the connections
and input level, see "8-Recording").
jack (stereo
PHONES
jack ( jack) for
LINE OUT RCA
6–Connection

Connecting to the EXT MIC jacks

You can connect microphones to the
jacks ( jacks) on the left side of the unit.
EXT MIC B (R) XLR
CAUTION
• Slide the PHANTOM switch to ON after connecting microphones
which need power supply, such as condenser microphones. Turn
the switch off when using other types of microphones, such as
dynamic ones. Otherwise the microphones may be damaged.
Refer to the manual of the microphones for details.
• Do not connect/disconnect a microphone when the PHANTOM
switch is ON.

Connecting to the LINE IN jack

You can connect the line output of an audio device to the
jack ( jack).
LINE IN RCA
and
EXT MIC A (L)
Microphones
Audio device or
external sound
source
35
TASCAM BB-1000CD