Tascam BB-1000CD Owner's Manual page 8

What you can do with the unit
Recording with the built-in microphones
To record sounds all around the unit by using the front and rear microphones
You can record sounds around the unit by using the built-in microphones on the front and rear. It is suitable when recording
the music played in a circle, placing the unit at the center of the circle. Select
record sound using the front and rear microphones.
It is useful when...
recording sound of a small orchestra surrounding the unit.
•
recording sound of a band in a sound room placing the unit at its center.
•
recording a meeting.
•
page 38 "Selecting the input"
«
To record sound using the front microphones only
It is suitable when recording a small band or solo play. Select
knob down to the minimum to record by the front microphones only.
REAR MIC
It is useful when...
sound source exists in front of the unit only, such as in a private lesson or solo play.
•
recording sound of a big orchestra at a position such as the conductor's.
•
page 38 "Selecting the input"
«
Recording with external microphones
When using external microphones, connect them to the
the screen. Turn the
INPUT
microphones in addition.
It is useful when...
recording in high quality with using high-performance condenser microphones.
•
page 35 "Connecting to the EXT MIC jacks"
«
page 38 "Selecting the input"
Recording the sound from an external device
To record the sound of a tape recorder or record player
You can record the playback sound of an external device such as a tape recorder or record player. Connect a device to the
jack on the left side and select
LINE IN
minimum.
You can give numbers to tracks automatically by using the auto recording function (page 44).
It is useful when...
copying sound on a cassette tape or MD on to a CD or SD card.
•
recording sound on media unplayable on this unit.
•
recording sound through the line output of an electric instrument.
•
page 35 "Connecting to the LINE IN jack"
«
page 38 "Selecting the input"
8
TASCAM BB-1000CD
knob down to the minimum. Slide the
REAR MIC
at
FRNT/LINE SOURCE
FRNT/REAR
at
FRNT/REAR SOURCE
jacks on the left side and select
EXT MIC
PHANTOM
in the screen. Turn the
INPUT
at in the
SOURCE INPUT
in the screen and turn the
INPUT
at
EXT/REAR SOURCE
switch to when using condenser
ON
knob down to the
FRONT MIC
screen to
in