Table of Contents
Advertisement
Multi-function Control Area
1.
"
"
: Select the following four submenu: <tone>, <time>, <alarm>, <source>. Or enter to the
next menu.
2. "
": Return to the previous menu.
3.
"
"
: Adjust settings.
For example:
a. When you want to
"
", followed by the "
to reset the figures of hours, then press the
"
"
key again, the time on the screen will flicker continuously to
setup.
b. When you want to
change the tone settings, scroll to the <tone> menu
the
"tone
menu .
" Press the "
<bass>. If you want to adjust the <SW>, press
to adjust the <SW> volume.
c. When you want to set
enter the
"source
menu .
<iPod.s>, <FM.s>. If you want to choose <buzzer>, press
this function has finished. The other two options have the same operation.
d.
When you want to set the alarm, press the "
"
", followed by the "
to
adjust the
hours, then press
adjusting the minutes setting,
alarm setup. After setting alarm, press the
"
" logo will flash all the time,
alarm sound module, the system will turn to FM input mode and mute state; if you choose <buzzer>
alarm sound module, the system will turn to the previous input mode;
sound module, the system will turn to iPod input mode.
iPod Control Area
a. Insert iPod into the iPod docking socket. System will turn to iPod
the system will return to the previous input mode when you move out of the iPod.
b. The middle area of the remote control (B) is especially designed for iPod player.
"
" : Controls the play and pause function of the iPod player.
"
,
" : Press and hold for 2 seconds to Fast Forward or Fast Reverse.
"
,
" : Controls the iPod player to play the previous or the next song.
set the time, press the "
" key to enter time setting mode. Press "
" key to scroll through the
the alarm sound module, scroll to the <source> menu
" Press the "
" key to enter alarm setting mode. Then Press "
"
"
key to
toggle to the minutes setting.
the time on the screen will flicker
"
press the
"
" key and scroll to the <time> menu by press
"
"
key to set the minutes, after reset it, press
three options: <SW>, <treb>,
"
"
to enter the SW menu
"
"key to scroll through the
"
" then the LCD flicker, it suggest
" key and scroll to the <alarm> menu by press
momentarily to confirm successful
"
key to turn the alarm on. When alarm is on, the
"
key to turn off the alarm,
if you choose <iPod.
"
" input mode automatically. And
.6.
confirm successful time
and press
"
"
to enter
", p
ress
"
and press
"
"
to
three options: <buzzer>,
Press
"
"
key
after
if you choose <FM.
s>
s> alarm
"
"
"
Advertisement
Table of Contents
