Beem B34,001 User Manual page 21

Standalone and tabletop grill
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 15
EN
free-standing or tabletop
appliance
To use the appliance as a free-standing
appliance, the the accessory parts for the
feet must be mounted. For this, proceed
as follows:
First of all, screw both legs together in
the middle. The leg end with the nar-
row diameter fits into the end of the
second leg with the wider diameter.
The 4 notches at the end of the legs
point downwards. Push this end onto
the foot tightly.
Put the housing of the grill so that it
fits tightly on the upper end of the leg.
If you wish to use as a tabletop appli-
ance, simply take the grill of the legs.
NOTE
Before starting grilling with the free-
standing appliance, make sure that it is
assembled correctly and is stable.
Attaching the cover
A clip (10) is provided for the cover (2). In
the case of the free-standing appliance,
this is simply hooked on the inside to the
handle of the cover (image C1). This ena-
bles the cover to be attached vertically to
the appliance so that it can act as a wind-
break. If you grill with the cover attached,
you can also attach it when turning over
the food in order to have both hands free.
If the clip gets in the way e. g., when cook-
ing a whole chicken under the cover, pull it
out of the holder.
BEEM - Elements of Lifestyle
BBQ standalone & tabletop grill
To hook the clip onto the cover, proceed
as follows:
First of all, mount the handle of the
cover.
Lightly pull the clip apart at both ends
(image C1).
Hook the clip into the holes provided
on the inside of the fixing of the cover.
To remove the clip, lightly pull both
ends apart (image C1) and remove it.
Drip tray
Never operate the appliance without
water in the drip tray otherwise the
appliance may overheat, particularly
when the cover is fitted.
During grilling, the water evaporates
and therefore keeps the food to be
grilled succulent and savoury, particu-
larly when the lid is fitted. This ena-
bles you to grill a whole chicken under
the cover without any problems.
The drip tray can be used as an aro-
ma depot (image D1): when grilling,
water and herbs or wine, beer, cognac
- appropriate to your dishes - can be
poured into the drip tray. The aroma-
tised steam gives your grilled food a
very special taste.
Before grilling, always fill the drip
tray (7) with water up to the "MAX"
mark.
Refill the drip tray after 1 1/2 to 2
hours with approx. 1 l water.
When refilling the drip tray, do not
pour water over the hot heating ele-
ment (9) but over the opening in the
middle of the grill plate (image B1)
instead.
19

Advertisement

Table of Contents
loading

Table of Contents