Troubleshooting - Beem Compact Power-MiXX User Manual

Compact Power-MiXX
The following table will help you locate and eliminate minor faults:
fault
The appliance does not
operate after pressing
pushbutton.
the
The automatic circuit
breaker in the electrical
distribution board trips.
Motor runs extremely
slowly or stops.
NOTE
► If you cannot resolve the problem with the steps described above, please contact
customer service.
24

Troubleshooting

Possible cause
Plug not inserted into socket.
Automatic circuit breaker in
electrical distribution board
tripped.
The internal safety switch has
switched off the appliance as
a result of overheating.
The mixing bowl, lid or the
output attachment has not
been properly fitted.
Too many appliances connect-
ed to the same power circuit.
No fault detected.
Mixing bowl overfilled.
Remedy
Insert plug.
Switch on the automatic
circuit breaker again.
Allow the appliance to
cool down.
Fit and lock the mixing
bowl, output attachment
or lid properly.
Reduce the number of
appliances on the power
circuit.
Contact customer
service.
Remove some of the
ingredients.
BEEM - Elements of Lifestyle
EN